What To Do If Your Water Heater Suddenly Stops Working
Go ServicesWe have encountered this great article about How to Troubleshoot and Repair an Electric Water Heater directly below on the net and decided it made good sense to talk about it with you over here.
Several modern residences take advantage of an electric hot water heater for their heating system, because of its ease and simplicity of use. Nonetheless, just like any other electric devices, problems may emerge with its usage, suddenly. It can be actually aggravating to get up to a cool shower instead of a hot one or having your bathroom with water that isn't warm enough and even also hot. Whatever the situation might be, water heater problems can be rather aggravating. Thankfully, we've made a listing of feasible solutions to your water heater problems. There are a variety of factors that might trigger most of these problems, it could be a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety and security. Whatever the problem is, getting it repaired must not posture way too much of an issue if you follow these steps:
Call An Expert:
If after changing all malfunctioning components and also resetting your temperature, the water heater still isn't working, you may need to call a professional plumber for a specialist point of view. The trouble with your heater could be that the hot and cold taps have been switched or it may be undersized for the amount of hot water needed in your home. Whatever the situation may be, a professional plumber would certainly assist fix the trouble.
Examine Your Power Supply:
As fundamental as this might appear, it is extremely needed. Without appropriate power, your hot water heater will certainly not work. So the first thing to do when your water unexpectedly retires is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it off and on once more. Change any type of damaged or worn-out fuse. Evaluate the appliance with power after these changes to see if it's now working.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you may require to examine the temperature level settings on your upper thermostat. Ensure the circuit breaker is turned off prior to doing anything. Open up the gain access to panel and press the red button for temperature level reset over the thermostat. This ought to help heat the water. Transform the breaker back on as well as check if the problem has actually been solved.
Inspect the Heating Element in the Water Heater:
If it's not a power trouble, after that try checking out your burner if it is still working. Test each of your burner to ensure the issue isn't with any of them. If any one of them is malfunctioning, replace that part and afterwards inspect whether the warm water is back on.
Verdict
Water heater problems are not constantly major. Many of them result from minor issues like a blown fuse or damaged heating element. Changing the malfunctioning parts need to work. However, if you are still incapable to resolve the problem, give a call to your nearby plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?†If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no†answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a fervent reader about Hot Water Heater Repair, I imagined sharing that short article was a good thing. Enjoyed reading our blog? Please share it. Let someone else find it. Many thanks for your time invested reading it.
Request Your Service